-
Posted by djgnjg8 on Sep 4th, 2008 at 6:44pm
Bump head
I need to get a new bump head. the cover came off the cap and i can not advane the line. This trimmer has been a pain in the grass since i bought it!Please let me know where i can get parts in person or on line aparts list and e-mail address would be extremely helpfull.
-
Posted by acorthell on Sep 4th, 2008 at 11:41am
fuel line
fuel line is split inside fuel tank. How do I replace?
-
Posted by cv3206 on Sep 3rd, 2008 at 2:26pm
spark
the edger doesnt seem that it firing at the spark plug
-
Posted by verlinm on Sep 2nd, 2008 at 4:08pm
Won't edge
My edger does not edge under load. The blade turns fine until I try to edge. How can I tell if the clutch is bad?
-
Posted by tyler_r_carroll on Sep 2nd, 2008 at 4:03pm
string
how to put new string on
-
Posted by craig.kegerise on Sep 2nd, 2008 at 2:05pm
Bumper knob
I cannot remove the bumper knob to replace the string. It will not turn. Any suggestions?
-
Posted by decondb1 on Sep 1st, 2008 at 8:06pm
run
won't stay running
-
Posted by yanknyky123 on Aug 30th, 2008 at 5:16pm
winding
how to wind
-
Posted by bbillcollins on Aug 28th, 2008 at 4:02pm
How do I change the string (or line) on my gasoline timmer
Troy built gasoline line trimmer
-
Posted by rudy-weezy on Aug 27th, 2008 at 10:08pm
manual
bad clutch
-
Posted by wmeridy on Aug 27th, 2008 at 8:54pm
gas lines
replace all gas lines
-
Posted by dabbler15 on Aug 27th, 2008 at 11:14am
Line replacement
how to replace line
-
Posted by rjfenbert on Aug 26th, 2008 at 8:36am
REPAIR PART
I need the carberator repair kit to the CS30 model. Where can I find it?
-
Posted by sgtshea on Aug 24th, 2008 at 3:18pm
help
need fuel line sizes for the ryobi 725r gas trimmer
-
Posted by reneern91 on Aug 23rd, 2008 at 6:51pm
owners manual
Need instructions how to restring!
-
Posted by lubster4 on Aug 22nd, 2008 at 7:21pm
Starter Rope
easiest way to replace the starter rope (came undone at inside knot). Thanks.
-
Posted by mrdiscreet2u on Aug 22nd, 2008 at 3:50pm
view of fule lines
need to see a view of the bolen bl 250 31 cc fule line hook ups
-
Posted by kjceberlin on Aug 22nd, 2008 at 9:35am
reversed threaded nut
Where can we buy a replacement nut?
-
Posted by lbclark on Aug 21st, 2008 at 4:07pm
pc30pruner/trimer
Is it possible to get repair and parts manual?
-
Posted by gfjh on Aug 20th, 2008 at 1:34pm
RE STRINGING
RESTRINGING
-
Posted by randyw23 on Aug 19th, 2008 at 8:08pm
stops
I have a model 358.795571 for a couple of years. It starts ok, runs while the choke is on and when I press the "gas" it runs ok for a minute and then quits. It doesn't matter how much gas I give it, it just chokes down.
-
Posted by talexander2 on Aug 19th, 2008 at 10:45am
will idle but not run
starts and idles but when I add throttle the engine dies. maybe running lean. is there a way I can adjust the mixture if this is the problem? This is a new trimmer.
-
Posted by yopaz on Aug 18th, 2008 at 1:02pm
r&r of belt
need info on the R&R of the belt on my edger
-
Posted by nt9v on Aug 18th, 2008 at 12:38pm
need owner manual
purchased used and need owners manual
-
Posted by rabelz on Aug 17th, 2008 at 10:52am
Starter Pulley/spring set up
Had to replace the pulley starter and spring assembly. Is there any pretensioning of the spring and/or wrapping of the cord around the plastic cord take up reel? Is so which direction?
-
Posted by sragan on Aug 16th, 2008 at 3:55pm
spark plug
I have a 4 cycle ryobi 790r brush cutter. I need a spark plug for it. The plugs says GENUINE REPLACEMENT PARTS A4RTF. Please tell me if I can use champion plug and what size. I took the old plug to my local hardware & auto parts stores and they said good luck in finding one.
-
Posted by h20plumit07 on Aug 16th, 2008 at 1:48pm
gas tank removal
gas line broke at tank and down by the carb
-
Posted by brianmessinger on Aug 16th, 2008 at 9:58am
does this have a coil ?
won't run - no spark
-
Posted by voodoochild336 on Aug 15th, 2008 at 11:36pm
fuel lines
I need a fuelline diagram for model 765r ryobi gas trimmer
-
Posted by skcarroll55 on Aug 15th, 2008 at 3:30pm
gas/oil
would like the oil to gas ratio for fs44
-
Posted by bmusicjem on Aug 15th, 2008 at 2:22pm
broken starter cord
I broke the starter pull cord, and have opened up the motor, but getting to the white spin wheel to reattach the cord has proven quite difficult. Any advice?
-
Posted by dillbob_2001 on Aug 13th, 2008 at 8:52pm
Line replacement
Who has the double line replacements, in Tooele, Utah or Salt lake.
-
Posted by lec_subsilence on Aug 13th, 2008 at 3:40pm
not starting
Not even starting after doing all the necessary actions indicated in the manual. Please help.
-
Posted by rickru1 on Aug 12th, 2008 at 8:18pm
chord
How do you get more string/chord to come out of the bottom?
-
Posted by kfrassetto on Aug 12th, 2008 at 4:57pm
manual
user manual missing
-
Posted by oncewhiles on Aug 11th, 2008 at 10:14pm
Looking for USA manf. equip
Are there any gas trimmer/edgers manufactured in the U.S.? I'm getting my dad one for his birthday and he won't use anything that isn't made in the USA. Thank you, Dee Barnes
-
Posted by nordman62 on Aug 11th, 2008 at 7:06pm
Ryobi 780R 31cc
This trimmer is really hard to start. I put a new spark plug with no amelioration. Ant idea??
-
Posted by miran112 on Aug 11th, 2008 at 6:49pm
lost owners manual
need c1200 manual
-
Posted by huck1935 on Aug 11th, 2008 at 1:08am
gas ratio
Craftsman gas lawn edger
Model #358-773110
Could you please tell me what the gas ratio is for the edger. Thank you
-
Posted by imarends on Aug 10th, 2008 at 3:11pm
Rope won't pull
rope seems to be stuck and won't pull out
-
Posted by lewisandtricia on Aug 10th, 2008 at 3:07pm
fuel line routing
I have replaced the fuel lines on my trimmer but I may have installed them incorrectly. I need a teck drawing to check by. The old lines were brittle and broke off so I was unable to replace systematically.
Thank You! Lewis A.
-
Posted by jordanderrick on Aug 10th, 2008 at 12:57pm
starter rope
the rope broke off and iam trying to find out how to fix or replace it
-
Posted by bher7845 on Aug 10th, 2008 at 12:46pm
Belt replacement
Need belt replacement schmatic
-
Posted by wilnance on Aug 9th, 2008 at 1:18pm
Tightening Belt
I have a Eager 1 3.5 H.P. gas edger. The belt is loose and I don't see how to tighten it? Can anyone give me some direction?
Thanks
-
Posted by bwhale45 on Aug 9th, 2008 at 11:28am
owners manual
Roybi trimmer
-
Posted by a1130_30116 on Aug 8th, 2008 at 11:47pm
carborater
need to know how to clean the carborater for my edger.
Thanks Alex
-
Posted by jkindel on Aug 8th, 2008 at 8:33pm
Replacement no.
Spark Plug replscement no.
-
Posted by Audie on Aug 8th, 2008 at 1:50pm
puting more string on spool
how do I refill the spool
-
Posted by lovtolah on Aug 8th, 2008 at 11:03am
Gas Lines are Dry Rotted
Need help in locating where the lines reconnect
-
Posted by critter329 on Aug 7th, 2008 at 8:17pm
parts
Bearing housing is chipped
-
Posted by jcarter29072 on Aug 5th, 2008 at 11:08pm
carb
need carb schematic
-
Posted by malreid on Aug 5th, 2008 at 10:10pm
engine manual
starting
-
Posted by bobbyclpalmer on Aug 5th, 2008 at 4:22pm
Shaft Movement
I need to know how to hold the shaft still so i can screw the new attachement off of the trimmer
-
Posted by bobbyclpalmer on Aug 5th, 2008 at 4:22pm
Shaft Movement
I need to know how to hold the shaft still so i can screw the new attachement off of the trimmer
-
Posted by hcb68 on Aug 4th, 2008 at 7:36pm
parts
i think the gear box if that's what it's called is broke when i try to cut some weeds stems the blade stops is their a part replacement for this if so where can i find it and how much is it Thank You
-
Posted by jmousaw on Aug 4th, 2008 at 6:58pm
NEED DIRECTIONS ON SOME OF THE USE
NO MANUAL WITH THIS PRODUCT AND NEED DIRECTIONS AND 2 NEW PARTS
-
Posted by jseltrecht on Aug 2nd, 2008 at 6:43pm
primer bulb
do you know where I can get the primer bulb for the john Deere trimmer bc1600
-
Posted by g.davis1 on Aug 2nd, 2008 at 4:26pm
frozen clutch
stater cord locked up
-
Posted by software2008 on Aug 2nd, 2008 at 3:09pm
Brush Trimmer 2090r Manual
I'm looking for the Ryobi Pro Model 2090r Trimmer.
-
Posted by johnez6893 on Aug 2nd, 2008 at 11:02am
Spits & sputters while running
the 3.5 edger runs rough, Model #536.372320
-
Posted by mabobsmom on Aug 1st, 2008 at 9:38pm
gas/oil
Costco sold us the floor model of the H70SS; we printed out the manual from your website but don't know what kind of oil or gas to put in it. Please help. or give another website to go to. Please use Lawlobo@aol.com or mabobsmom@yahoo.com to correspond with...we gave it as a gift, but will be glad…
-
Posted by bvegeris on Aug 1st, 2008 at 2:28am
starting
even though I follow the starting procedure as detailed in the manuel, the trimmer takes many attempts before it starts..this is a brand new machine which I just purchased.......I am wondering what the manual actually means by "controlled steady motion" when pulling the starter cable?....how does "E…
-
Posted by amrjuan on Jul 30th, 2008 at 10:35pm
gas lines problem
gas lines are broken and I try to fix but don't start
-
Posted by deseyst on Jul 30th, 2008 at 7:24pm
manual
carburator
-
Posted by ivansterpin on Jul 30th, 2008 at 6:39pm
Pull starter
Pull starter won't retract
-
Posted by john.piazza on Jul 30th, 2008 at 2:10pm
will not start
ran a short time then quit. Will not restart for more than a few seconds.
-
Posted by marik.fontanilla on Jul 29th, 2008 at 8:52pm
parts manual
gas line broken
-
Posted by bill.potter on Jul 29th, 2008 at 4:21pm
recoil spring broken
How do you remove the clutch rotor assembly to access & replace the recoil spring assembly?
-
Posted by bbrandt1 on Jul 29th, 2008 at 3:37pm
Won't start, has spark
I have a Ryobi 790r engine for my edger, blower, etc.
It will not start. I have checked and it is getting spark. I took carb. apart anc cleaned, but engine doen't want to fire. Any suggestions. Thanks
-
Posted by meshang on Jul 29th, 2008 at 3:19pm
replace fuel line
need to replace fuel line on ryobi trimmer model#725r ez please help
-
Posted by shenry4427 on Jul 29th, 2008 at 2:14pm
gas trimmer
replaced on/off switch in handle. need schematic to see how the spring fits back in
-
Posted by paul on Jul 29th, 2008 at 8:05am
what hold the fuel lines inbottom of tank?
One fuel line has fallen from the bottom of the fuel tank is there a special fitting to reattach it to?
-
Posted by luckysdad on Jul 28th, 2008 at 10:43pm
fuel line replacement
where to place the fuel lines
-
Posted by enos9fan on Jul 28th, 2008 at 6:46pm
trigger spring replacement
trigger broke, spring fell off and don't know which way to put on spring
-
Posted by regi on Jul 28th, 2008 at 3:49pm
weed line
I don't know how to replace the line
-
Posted by randallocp on Jul 28th, 2008 at 10:59am
white plastic starter needs replaced
pull starter plastic part ground down can't start skips part when you pull starter
-
Posted by javier.hernandezc on Jul 27th, 2008 at 8:12pm
manual
the engine came loose. I tried to open it up but can not get to it. is there an assembly manual available?
-
Posted by edshirk on Jul 27th, 2008 at 12:00pm
Starting
I have had this product about 1 year. The pull cord extends and retracts but has no effect on the compression to start the engine.
-
Posted by jbmucker on Jul 27th, 2008 at 8:55am
Parts
Where can I get parts for this machine?
I lost the bolt for the cutter...part #791-181699.
Thanks
-
Posted by lilesc on Jul 27th, 2008 at 12:42am
changing blade
Can not remove blade
-
Posted by dal on Jul 26th, 2008 at 9:00pm
Will not start/run
It has never really started easy. I follow the instructions to no avail. When it did work I would start out with the choke in position #1 - then to 2 and would have to leave it on 2. But eventually it would run. Mine is apprx 1 yr old. I have dumped the gas from the tank and the can - remixed. Pulle…
-
Posted by clyde.morris on Jul 26th, 2008 at 5:18pm
Fuel line replacement
How to replace broken fuel line?
-
Posted by j.kduran on Jul 26th, 2008 at 3:26pm
Changing string cap that screws into weedeater
How do you replace the cap where the string goes
-
Posted by info on Jul 26th, 2008 at 12:08pm
fix recoil
fix recoil - plastic tabs worn off
-
Posted by stephenhill16 on Jul 26th, 2008 at 12:01pm
wont suck up fuel from gas tank
i press the primer bulb but it doesnt suck up fuel, just blows bubbles in the tank, tried swapping pipes but makes no difference. Please help
-
Posted by khyman1 on Jul 25th, 2008 at 10:14pm
changing motor oil
how often must I CHANGE the engine oil
-
Posted by leonwill7 on Jul 25th, 2008 at 9:20pm
Where to get manual
Were do we get a manual for the WT 3100?
-
Posted by crumcamp on Jul 25th, 2008 at 7:17pm
pull start
pull string
-
Posted by bobb on Jul 25th, 2008 at 9:20am
adapter nut
Can this gas trimmer be hooked up with the Hassle- Free trimmer head? None of the hardware with the kit works.
-
Posted by bes3kids on Jul 24th, 2008 at 1:19pm
Manual
Can you help me locate a manual for the gas trimmer listed above. Thanks.
-
Posted by nehrt4 on Jul 23rd, 2008 at 11:46pm
shop manual
carberator adjustment
-
Posted by pjcavadeas on Jul 23rd, 2008 at 10:11am
String replacement
Can't seem to get the string restrung on this model.
-
Posted by greggorywaterman on Jul 21st, 2008 at 3:47pm
replacing trimming cord
replacing trimming cord
-
Posted by nena.yochum on Jul 21st, 2008 at 12:07pm
adding new line
adding new line
-
Posted by sbrennan1 on Jul 20th, 2008 at 8:29pm
Stalls
Weedwacker runs fine...as soon as you put a load on it (pull the trigger)it stalls. Air filter is good, and I changed the spark plug...any ideas???
-
Posted by panderson19651 on Jul 20th, 2008 at 4:12pm
Manual
need owners manual
-
Posted by rollie_stephens on Jul 20th, 2008 at 10:54am
Replacement - Plastic Air Filter Cover
The platic air filter cover (snaps over the air filter) broke on my trimmer. Where can I find a replacement part fot that?
-
Posted by rulds-2 on Jul 19th, 2008 at 9:34pm
service repair manual
clutch doesnot turn cable drive.
-
Posted by robert2370 on Jul 19th, 2008 at 5:10pm
Line Spooler
not sure if i'm loading the line correctly and have lost the manual
-
Posted by alti4 on Jul 19th, 2008 at 3:26pm
refeeding
refeeding line
Mobile Phones are Your Next Tour Guide
Keeping Hot Electronics Cool
Quick Steps to a Long-Lasting Paint Job: DIY Guide
Copyright © 2008 OwnerIQ, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.
Add products and discussions to your stuff and receive a timely personalized email containing updates, tips and solutions for all the
products you own!